AMTA Paper Archive


Welcome to the AMTA paper archive. Select a category, publication date or search by author.

(Note: Papers will always be listed by categories.  To see ALL of the papers meeting your search criteria select the "AMTA Paper Archive" category after performing your search.)


Search AMTA Paper Archive
    
    




Sort By:  Date Added   Publication Date   Title   Author

Analysis

Personal Near-field System
Dan Slater, October 2019

In 1987 the author built the world's first Personal Near-field antenna measurement System (PNS). This led to the formation of Nearfield Systems Inc. (NSI) a company that became a major manufacturer of commercial near-field antenna measurement systems. After leaving NSI in 2015 several new personal antenna measurement tools were built including a modern updated PNS. The new PNS consists of a portable XY scanner, a hand held microwave analyzer and a laptop computer running custom software. The PNS was then further generalized into a modular electromagnetic field imaging tool called "Radio Camera". The Radio Camera measures electromagnetic fields as a n-dimensional function of swept independent parameters. The multidimensional data sets are processed with geometric and spectral transformations and then visualized. This paper provides an overview of the new PNS and Radio Camera, discusses operational considerations, and compares it with the technology of the original 1987 PNS. Today it is practical for companies, schools and individuals to build low-cost personal antenna measurement systems that are fully capable of meeting modern industry measurement standards. These systems can be further enhanced to explore and visualize electromagnetic fields in new and interesting ways.

Topology for Maintaining Symmetry in Hybrid LPDA-Broadband-Dipole Antennas
James Mclean, October 2019

Topologies for hybrid LPDA-broadband-dipole antennas (hybrid antennas) are systematically presented and evaluated regarding their ability to provide symmetric response as defined and required in recent standards. The symmetry property of the hybrid antenna is fundamentally related to the intrinsic infinite balun, the choke structure, and the matching transformer for the broadband dipole, if one is employed. In general, hybrid antennas incorporating matching transformers are more symmetric if the transformer is effectively center-tapped. More specifically, in a hybrid antenna employing an impedance matching transformer derived from an equal-delay hybrid, the sum port can be advantageously connected via a low-impedance load to the center of a symmetric choke arrangement. A specific topology for a hybrid LPDA-broadband-dipole antenna is given here which employs a 1:4 impedance transforming balun between the LPDA and broadband dipole but at the same time provides symmetry such that the antenna satisfies the requirements given in recent standards. Thus, the advantages of the impedance transforming balun are realized, but the symmetry of the antenna is maintained. Finally, it is shown that a hybrid antenna satisfies the symmetry requirements if a 180 • rotation about the bore sight axis is equivalent to a 180 • electrical phase shift in the source and that this behavior is obtained with a combination of 2-fold rotational symmetry in the radiating structure and electrical symmetry in the intrinsic balun structure.

De-embedding Radome Depolarization from Measurements with a Non-Ideal Circularly Polarized Antenna Source
Joshua Roper, Matthew Miller, Don Runyon, October 2019

An approximation method is developed to remove the source antenna's cross-polarization discrimination (XPD) contribution from the total measured XPD. This modeling is shown to correlate very well on a flat-panel test with a radome's predicted (ideal-source) XPD. Additionally, a mathematical formulation of the theoretical cross-polarization discrimination (XPD) bounds is presented to validate the proposed method. The measured axial ratio should not exceed these bounds. The measured result is within these bounds and thus this model serves as an additional validation step to both the proposed method and the measured results.

Multiphysics Analysis of RF Pyramidal Absorbers
Zhong Chen, Hamid Bayat, Anoop Adhyapak, October 2019

RF absorbers dissipate the incident electromagnetic wave by converting the RF energy into heat. In many applications, the absorbers can be subjected to high power incident fields. It is imperative to characterize and analyze the thermal behaviors for these high power applications. In this paper, a multi-physics (of EM and thermal) study has been conducted. The absorbers are first simulated in the ANSYS HFSS for electromagnetics. The absorbers are placed under plane wave incident field as well as from a pyramidal horn antenna in the near field. The output of the HFSS model is then imported to the thermal and computational fluid dynamics (CFD) tool, ANSYS ICEPAK. In order to obtain accurate thermal properties of the material, an experimental setup was designed. The simulation results are validated against measured data. Several effects are shown to affect the absorber internal temperatures for the same incident field level at the front of the absorbers, such as the antenna test distance to the absorber, the shape of the pyramid, and the measurement frequency. These simulation data provide greater insights into the heat dissipation and temperature distribution inside the absorbers.

Combination of Spherical and Planar Scanning for Phaseless Near-Field Antenna Measurements
Fernando Rodríguez Varela, Galocha Iraguen, Manuel Sierra Castañer, Javier Fernández Alvárez, Michael Mattes, Olav Breinbjerg, October 2019

The two scans phaseless technique is a well-known procedure for the characterization of antennas on near-field ranges without need of measuring the phase. Amplitude information over two surfaces compensates for the lack of phase reference. In this paper we propose the combination of spherical and planar surfaces for the application of the two scans technique, together with the application of Wirtinger Flow, a state-of-the art phase retrieval algorithm with high convergence guarantees. The use of different types of surface adds additional information about the field's degrees of freedom, allowing for smaller separation between acquisition surfaces as compared with the 2-sphere techniques. In addition, an initial estimation for the phase is not required. The phase retrieval process is formulated in terms of the Spherical Wave Expansion (SWE) of the antenna under test. The SWE-to-PWE (Plane Wave Expansion) is utilized in order to process the amplitude field on the planar surface. Results for simulated and measured near-field data are shown to demonstrate the potential capabilities of the proposed technique.

Indoor 3D Spherical Near Field RCS Measurement Facility: A new high resolution method for 3D RCS Imaging
Pierre Massaloux, Thomas Benoudiba-Campanini, Pierre Minvielle, Jean-François Giovannelli, October 2019

Indoor RCS measurement facilities are usually dedicated to the characterization of only one azimuth cut and one elevation cut of the full spherical RCS target pattern. In order to perform more complete characterizations, a spherical experimental layout has been developed at CEA for indoor Near Field monostatic RCS assessment [3]. This experimental layout is composed of a 4 meters radius motorized rotating arch (horizontal axis) holding the measurement antennas while the target is located on a polystyrene mast mounted on a rotating positioning system (vertical axis). The combination of the two rotation capabilities allows full 3D near field monostatic RCS characterization. 3D imaging is a suitable tool to accurately locate and characterize in 3D the main contributors to the RCS. However, this is a non-invertible Fourier synthesis problem because the number of unknowns is larger than the number of data. Conventional methods such as the Polar Format Algorithm (PFA), which consists of data reformatting including zero-padding followed by an inverse fast Fourier transform, provide results of limited quality. We propose a new high resolution method, named SPRITE (for SParse Radar Imaging TEchnique), which considerably increases the quality of the estimated RCS maps. This specific 3D radar imaging method was developed and applied to the fast 3D spherical near field scans. In this paper, this algorithm is tested on measured data from a metallic target, called Mx-14. It is a fully metallic shape of a 2m long missile-like target. This object, composed of several elements is completely versatile, allowing any change in its size, the presence or not of the front and / or rear fins, and the presence or not of mechanical defects, … Results are analyzed and compared in order to study the 3D radar imaging technique performances.

Reduced Aperture Flanged Rectangular Waveguide Probe for Measurement of Conductor Backed Uniaxial Materials
Adam L Brooks, Michael J Havrilla, October 2019

An algorithm is developed for the non-destructive extraction of constitutive parameters from uniaxial anisotropic materials backed by a conductive layer. A method of moments-based approach is used in conjunction with a previously-determined Green function. A dominant-mode analysis is done for rapid comparison of the derived forward model with that of commercially-available software. Finally, laboratory measurements are taken to compare this approach to that of a destructive, high-precision method.

A Review of the CW-Ambient Technique for Measuring G/T in a Planar Near-Field Antenna Range
Ryan T Cutshall, Brett T Walkenhorst, Justin Dobbins, Jacob Freking, Bruce Williams, October 2019

Techniques for measuring G/T have been previously presented at AMTA; however, there are very few papers that discuss how to measure G/T in a near-field antenna range. One recent paper discussed such a method and gave a brief description within the larger context of satellite payload testing [1]. The paper's treatment of G/T was necessarily brief and gives rise to several questions in relation to the proposed method. Other papers that treated this topic required the antenna aperture to be separable from the back-end electronics, which may not be possible in all cases [2-3]. In this paper, we discuss in great detail a slightly modified version of the G/T measurement method presented in [1]. A signal and noise power diagram is presented that can be useful for understanding how system signal-to-noise ratio (SNR) relates to G/T, and a few common misconceptions concerning the topic of G/T are addressed. The CW-Ambient technique for computing G/T of a Unit Under Test (UUT) from measurements in a planar near-field system is described in detail, and a list of assumptions inherent to the CW-Ambient technique is presented. Finally, the validity of the CW-Ambient technique is assessed by analyzing measured data collected from a separable UUT.

A Methodology for Instantaneous Polarization Measurements Using a Calibrated Dual-Polarized Probe
Brett T Walkenhorst, Steve Nichols, October 2019

Accurately measuring the polarization of an antenna is a topic that has garnered much interest over many years. Methods abound including phase-referenced measurements using two orthogonal polarizations, phase-less measurements using two or three pairs of orthogonal polarizations, spinning linear probe measurements, and the rigorous three-antenna polarization method. In spite of the many publications on the topic, polarization measurements are very challenging and can easily lead to confusion, particularly in accurately determining the sense of polarization. In this paper, we describe a method of accurately and rapidly measuring the polarization of an antenna with the aid of a multi-channel measurement receiver and a dual-polarized probe. The method acquires phase-referenced measurements of two orthogonal polarizations. To enable such measurements, we describe a methodology for calibrating the probe. We also describe a tool for automating the polarization measurement and display of the polarization state. By automating the process, it is hoped that the common challenges and confusions associated with polarization measurements may be largely obviated.

Method-of-Moments Modeling of Conducting Objects within the Fast Irregular Antenna Field Transformation Algorithm
Jonas Kornprobst, Alexander Paulus, Thomas F Eibert, Raimund A M Mauermayer, October 2019

Reducing near-field measurement times is an important challenge for future antenna measurement systems. We propose to incorporate knowledge about material parameters of the antenna measurement environment within the simulation model. To do so, a method-of-moments code with surface discretization is implemented as a side constraint to the near-field far-field transformation problem performed with the fast irregular antenna field transformation algorithm. Transformation and source reconstruction results of synthetic measurement data demonstrate the effectiveness of the proposed method.

Fast Spherical Near-Field Measurements on Arbitrary Surfaces by Application of Pointwise Probe Correction to Compressed Sampling Schemes
Cosme Culotta-López, Dirk Heberling, October 2019

The major disadvantage of Spherical Near-Field (SNF) measurements is their long acquisition time. To calculate the Antenna Under Test's (AUT) far-field radiation characteristics , a sphere containing the AUT must be sampled. Classically, equiangular sampling is chosen, being the resulting sphere heavily oversampled. Since the Spherical Mode Coefficients (SMCs) are usually sparse, an approach to reduce the measurement time of SNF measurements is to undersample the sphere and to reconstruct the SMCs using compressed-sensing techniques. Using a sampling matrix with a minimum mutual coherence for the given bases of the SMCs increases the probability of recovery. The SMCs are defined in the basis of the spherical harmonics or Wigner D-functions, which limits the geometries in which this technique can be applied. In this work, the application of pointwise probe correction for the description of non-spherical surfaces in the Wigner-D basis expansion is suggested. The chosen sampling points are radially projected onto the measurement surface and the new distance to each point is calculated. New equivalent probe response coefficients are calculated per measurement point according to their distance to the AUT. To compensate for different orientations other than the probe pointing to the AUT's minimum sphere's center, the probe's SMCs are rotated to reflect the real orientation of the probe at each point prior to the calculation of the probe response coefficients. Although more computationally demanding than classical probe correction, this technique allows measurements with different, potentially faster geometries and enables the application of compressed sensing to other, non-spherical conventional scanning systems.

A Low-Cost Multicopter Based Near-Field Antenna Measurement System Employing Software Defined Radio and 6-D Laser Metrology
Raimund A M Mauermayer, Jonas Kornprobst, Torsten Fritzel, October 2019

A near-field antenna measurement system is presented that consists of components that are rather unusual compared to conventional antenna measurement setups. Instead of a vector network analyzer (VNA), a dual-channel wideband software defined radio (SDR) is used to measure the signals at the ports of a dual-polarized probe antenna. Instead of an exact multi-axis positioner for the antenna under test (AUT) or the probe antenna, a multicopter moves the probe along a predefined trajectory on a surface around the AUT. Instead of using expensive laser interferometry equipment, the position and orientation of the probe antenna are determined by a 6-D tracking system that was originally developed for virtual reality (VR) applications. Still, the first measurement results show the usability of the low-cost system for antenna measurements in the frequency range of mobile communication services.

EMC Measurement System Based on Software Defined Radio and Diagnostic Techniques
Rubén Tena Sánchez, Manuel Sierra Castañer, L J Foged, D Gray, October 2019

In a previous paper a new referenceless measurement setup based on a reference antenna was used for characterizing the radiation of antennas in the planar scanner [1]. The method is based on using a low-cost receiver to retrieve the amplitude and phase of the signal. This paper explores the limitations of the method for different geometries and implements a multiprobe electromagnetic compatibility measurement system. Once the amplitude and phase are recovered, diagnostic techniques can be applied and also near-field to near or far-field transformations to calculate the field at distances defined by standards. The results demonstrate the good accuracy of the method in comparison with traditional electromagnetic compatibility laboratories.

Near-Field Techniques for Millimeter-Wave Antenna Array Calibration
Gerhard F Hamberger, Corbett Rowell, Benoˆıt Benoˆıt Derat, October 2019

A reliable technique for antenna array characterization and calibration is demonstrated for two state-of-the-art antenna measurement systems, a near-field system and a compact antenna test range system. Both systems are known to reduce the measurement distance between device under test and the probe antenna in comparison to classical far-field systems, which need to provide at least the Fraunhofer distance as minimum range length. Equivalent magnetic surface currents are derived from measurements, which represent the electric field on the applied Huygens surface. The calculated equivalent magnetic currents are utilized for characterizing two completely different antenna arrays in the millimeter-wave region. Magnitude and phase calibration opportunities of antenna arrays are discussed, as well as the accuracy provided by the proposed calibration technique.

Feasibility of Coaxial Resonators for Permittivity Measurements of Pressurized Gases
Jose Oliverio Alvarez, October 2019

This paper investigates numerically the feasibility of using quarter wavelength coaxial resonators for permittivity measurements of pressurized gases, as found in the subsurface. The non-short-circuited end of the resonator is facing the inside of a pressure cell and is filled with pressure resistant, low-loss dielectric material. Results show that as pressure increases, the corresponding increase in dielectric constant can be detected through a shift in the resonant frequency of |S11| and confirmed by a change in the phase of S11.

Extraction of Magneto-Dielectric Properties from Metal-Backed Free-Space Reflectivity
R D Geryak, J W Schultz, October 2019

Intrinsic magnetic and dielectric properties of magneto-dielectric composites are typically determined at microwave frequencies with both transmission and reflection data. An iterative method, such as root-finding, is often used to extract the properties in a frequency-by-frequency basis. In some situations, materials may be manufactured on a metal substrate that prevents transmission data from being obtained. This happens when the materials are too fragile or too strongly bonded to the substrate for removal and must be characterized with the metal substrate in place. This paper compares two different free-space extraction algorithms, developed for the simultaneous extraction of complex permittivity and permeability from metal-backed reflection. One of the algorithms relies on reflection measurements of the same material with two known thicknesses. The second method takes advantage of wide bandwidth measurements to fit the reflection to analytical models (e.g. Debye). The accuracy of these methods are evaluated and the stability criteria for the techniques will be discussed, as well as the tolerance of the techniques to various measurement errors.

Update of IEEE Std 1720-2012 Recommended Practice for Near-Field Antenna Measurements
L J Foged, Michael H Francis, Vince Rodriguez, ,, October 2019

The IEEE Standards Association Standards Board (IEEE-SASB) approved the IEEE Std 1720™ "Recommended Practice for Near-Field Antenna Measurements" in 2012 [1]. More than forty dedicated people from industry, academia and other institutions contributed to the creation of this new document. The main motivation for a new standard dedicated to near-field measurements was to complement the existing IEEE Std 149-1979™ "Test Procedures for Antennas" [2]. According to the IEEE-SA policies, the existing standard IEEE Std 1720-2012™ is approaching expiration in 2022. A working group of the APS Standard Committee has been formed to review the current document. Most of the current standard is still relevant and useful for individuals designing and evaluating near-field antenna measurement facilities and other people involved in antenna measurements. However, the standard needs update and renewal in areas in which new developments and technologies have matured. This paper gives an overview of the current standards and discusses the suggested potential changes.

Proposed Changes and Updates on IEEE Std 1128 - Recommended Practice on Absorber Evaluation
Zhong Chen, Vince Rodriguez, October 2019

The last published version of the IEEE Std 1128 is the 1998 edition. It is titled "Recommended Practice for RF Absorber Evaluation in the Range of 30 MHz to 5 GHz". Over the years, the document has been used widely for absorber evaluations in electromagnetic compatibility (EMC) applications as well as in antenna and microwave measurement applications. Besides the obvious frequency range which needs to be expanded to satisfy today's applications, several areas are in need of an update. The proposed document will change the upper frequency limit to 40 GHz (with provisions in the document to potentially extend above 40 GHz based on test methods). Measurement uncertainties were not discussed in the IEEE Std. 1128-1998. In the new edition, measurement instrumentation and test methods are expected to be updated with guidance on estimating measurement uncertainties. In the proposed document, a section on absorber evaluations for high power applications is planned, and fire properties and test methods will be included.

Measurement procedures and post-processing for fast antenna characterization
Benjamin Fuchs, Laurent Le Coq, Marco Donald Migliore, October 2019

Three measurement procedures and associated post-processing for the fast characterization of antennas are presented. First, an approach for the fast diagnosis of antenna under test (AUT), ie. the identification of potential defaults with respect to an ideal antenna, is described. The technique leverages the knowledge of the ideal (expected) radiation pattern and uses a sparse recovery algorithm to locate the few potential defaults. Second, a scheme is proposed to interpolate the near field radiated by the AUT. It exploits the low complexity of the electromagnetic field and does not resort to any knowledge on the AUT. Third, an approach to speed up the measurement of the AUT far field radiation pattern is detailed. The only input is the maximum dimension of the AUT. The technique relies on the sparse expansion of antenna radiation patterns on spherical harmonic basis. For each of the three examples, experimental results will be shown for various complex radiating structures in different frequency bands.

Accurate Calibration of Truncated Spherical Near Field Systems with Different Ground Floors using the Substitution Technique
F Saccardi, F Mioc, A Giacomini, A Scannavini, L J Foged, M Edgerton, J Estrada, P O Iversen, J A Graham, October 2019

The calibration of the antenna measurements system is a fundamental step which directly influences the accuracy of any power-related quantity of the device under test. In some types of systems, the calibration can be more challenging than in others, and the selection of a proper calibration method is critical. In this paper, the calibration of the truncated spherical near-field ranges typically used for automotive tests is investigated, considering both absorbing and conductive floors. The analyses are carried out in a 12:1 scaled multi-probe system, allowing access to the "true", full-sphere calibration which is used as reference. It will be demonstrated that the substitution (or transfer) method is an excellent calibration technique for these types of systems, if applied considering the efficiency of the reference antenna.







help@amta.org
2024 Antenna Measurement Techniques Association. All Rights Reserved.
AMTA_logo_115x115.png
 
 

CONNECT WITH US


Calendar

S M T W T F S
1 2 3 4 5 6 7
8 9 10 11 12 13 14
15 16 17 18 19 20 21
22 23 24 25 26 27 28
29 30 31